Tile installation in Dallas-Fort Worth
Ceramic, porcelain, stone — installed level, lasting decades. Done right the first time.
- Vetted pros
- 4.9 rating
- 60-sec quote
- Local DFW
What tile installation involves
Tile is permanent. Done right, it lasts 30+ years. Done wrong — wrong thinset, no backer board, poor leveling — and you get cracked tiles, popped grout, and a tear-out job a few years in.
The work that matters happens underneath: proper cement board over wood subfloor, modified thinset matched to the tile type, and meticulous leveling — especially with today's large-format tiles where any deviation shows.
Why this matters
Tile sets the floor for 20+ years
There's no halfway with tile. Either it's installed perfectly or it cracks. We only match installers with a long track record.
Proper subfloor + thinset + grout
Cement board (not just plywood), modified thinset for the tile spec, and the right grout (sanded vs unsanded) for the joint width.
Pattern layout planning
Good installers plan the layout so cuts at walls are balanced and the most-visible tiles are full. Bad installers start at one wall and end with a sliver.
How tile installation works
- 01
Measure & layout planning
Find centers, dry-fit, plan cuts.
- 02
Subfloor prep / backer board
Cement board over wood subfloor, screwed and seamed.
- 03
Thinset application
Notched trowel matched to tile size.
- 04
Tile placement
Leveled with spacers, large-format tiles back-buttered.
- 05
Grouting
Sanded or unsanded grout matched to joint width.
- 06
Sealing
Penetrating sealer on natural stone and grout.
Tile materials we install
Ceramic
Most affordable, good for walls and light-traffic floors.
Porcelain
Denser, harder, more water-resistant. Best for floors.
Natural stone
Marble, travertine, slate. Premium and beautiful.
Large-format (24"+)
Modern look — requires extra leveling skill.
Mosaic
Accent walls, shower floors, decorative bands.
What it costs in DFW
Typical range
$7 – $14 / sqft installed
Your matched pro gives you an exact quote after seeing the project — these are starting points.
What drives the price
- Tile material (ceramic vs porcelain vs natural stone)
- Tile size (large-format costs more to install)
- Pattern complexity (herringbone, basketweave)
- Backer board and subfloor prep
- Sealing for natural stone
Common questions
Related services
Residential
Hardwood installation
Solid wood floors that last generations. Installed by craftsmen who know how to handle DFW slabs and Texas humidity.
Learn moreResidential
Hardwood refinishing
Sand, stain, and refinish your existing hardwood — like new again, at a fraction of replacement cost.
Learn moreResidential
Carpet installation
Plush, berber, frieze, pet-friendly — installed clean and tight by a vetted local pro.
Learn moreReady to get started?
One quote. One vetted local pro. No spam, no callbacks from 5 contractors.